Lynda - Autodesk Inventor 2017 Essential Training

Creation Time	Feb. 5, 2024, 3:01 p.m.
Last Access Time	March 21, 2025, 3:13 p.m.
File Size	1.4 GB
Keywords	Training Autodesk Lynda - 2017 Essential Inventor
Total Requests	73
Total Files	897
Magnet Link	Please wait ...
	Download (Magnet Link) Play (Watch Online)

05. Creating Sketch Geometry/473456_05_02_3D15_Rectangle_Arc.mp4 32.1 MB
09. Understanding Part Modeling/473456_09_04_3D15_Revolve.mp4 29.5 MB
09. Understanding Part Modeling/473456_09_02_3D15_Extrude.mp4 29.1 MB
09. Understanding Part Modeling/473456_09_06_3D15_Loft_Rails.mp4 27.3 MB
09. Understanding Part Modeling/473456_09_05_3D15_Loft.mp4 26.0 MB
03. Navigating the Interface/473456_03_02_3D15_Nav_Navbar.mp4 25.9 MB
08. Projecting and Importing Geometry/473456_08_01_3D15_Project_Geometry.mp4 25.3 MB
12. Creating Sculpted Objects/473456_12_05_3D15_Insert_Modify_Edge.mp4 25.1 MB
08. Projecting and Importing Geometry/473456_08_02_3D15_Import_ACAD_Share_Sketch.mp4 24.6 MB
05. Creating Sketch Geometry/473456_05_03_3D15_Spline.mp4 23.1 MB
12. Creating Sculpted Objects/473456_12_03_3D15_Edit_Form.mp4 22.7 MB
14. Using Constraints to Position Parts/473456_14_01_3D15_Mate_Flush.mp4 22.5 MB
13. Adding Parts to an Assembly File/473456_13_03_3D15_Assembly_Create_Edit.mp4 22.3 MB
14. Using Constraints to Position Parts/473456_14_06_3D15_Motion_Constraint.mp4 22.1 MB
07. Work Features/473456_07_03_3D15_Workplanes.mp4 21.3 MB
15. Assembly Visualizaion Techniques/473456_15_02_3D15_Visual_Styles.mp4 20.7 MB
12. Creating Sculpted Objects/473456_12_04_3D15_Symmetry.mp4 20.4 MB
05. Creating Sketch Geometry/473456_05_04_3D15_Construction_Geometry.mp4 19.1 MB
05. Creating Sketch Geometry/473456_05_01_3D15_Drawing_Lines.mp4 19.0 MB
04. Sketching Concepts/473456_04_03_3D15_Understanding_Constraints.mp4 18.8 MB
06. Modifying Sketch Geometry/473456_06_03_3D15_Pattern.mp4 18.5 MB
13. Adding Parts to an Assembly File/473456_13_04_3D15_Content_Center.mp4 18.4 MB
09. Understanding Part Modeling/473456_09_01_3D15_Part_Modeling_Introduction.mp4 17.7 MB
16. Creating Drawing Views/473456_16_03_3D15_Section_Views.mp4 17.7 MB
16. Creating Drawing Views/473456_16_02_3D15_Base_Projected_Views.mp4 17.6 MB
14. Using Constraints to Position Parts/473456_14_04_3D15_Drive_Constraint.mp4 17.4 MB
06. Modifying Sketch Geometry/473456_06_01_3D15_Trim_Extend_Split.mp4 17.3 MB
03. Navigating the Interface/473456_03_01_3D15_Nav_Viewcube.mp4 17.2 MB
02. Leveraging the Project/473456_02_01_3D15_Project_File_Introduction.mp4 17.0 MB
10. Building Parts with Placed Features/473456_10_05_3D15_Shell.mp4 16.8 MB
09. Understanding Part Modeling/473456_09_03_3D15_Extrude_To_Next.mp4 16.7 MB
05. Creating Sketch Geometry/473456_05_06_3D15_Parameters.mp4 16.4 MB
17. Creating Basic Annotations/473456_17_01_3D15_Dimensions.mp4 16.0 MB
13. Adding Parts to an Assembly File/473456_13_02_3D15_Assembly_Place_Part.mp4 15.9 MB
11. Creating Patterns of Features/473456_11_01_3D15_Rectangular_Pattern.mp4 15.8 MB
10. Building Parts with Placed Features/473456_10_03_3D15_Threaded_Holes.mp4 15.6 MB
09. Understanding Part Modeling/473456_09_07_3D15_Sweep.mp4 15.5 MB
02. Leveraging the Project/473456_02_03_3D15_Creating_Project_File_For_Course.mp4 14.9 MB
10. Building Parts with Placed Features/473456_10_04_3D15_Fillet_Chamfer.mp4 14.1 MB
03. Navigating the Interface/473456_03_03_3D15_Nav_Browser.mp4 14.1 MB
11. Creating Patterns of Features/473456_11_02_3D15_Rectangular_Pattern_Parameter.mp4 13.8 MB
04. Sketching Concepts/473456_04_01_3D15_Intro_Sketching.mp4 13.7 MB
07. Work Features/473456_07_01_3D15_Workfeature_Introduction.mp4 13.7 MB
15. Assembly Visualizaion Techniques/473456_15_03_3D15_Visual_Appearance_Settings.mp4 13.6 MB
05. Creating Sketch Geometry/473456_05_05_3D15_Creating_Dimensions.mp4 13.4 MB
02. Leveraging the Project/473456_02_02_3D15_Creating_Project_File.mp4 12.9 MB
17. Creating Basic Annotations/473456_17_03_3D15_Baseline_Ordinate_Chain.mp4 12.9 MB
07. Work Features/473456_07_04_3D15_Workpoint_Axis.mp4 11.8 MB
10. Building Parts with Placed Features/473456_10_01_3D15_Holes.mp4 11.7 MB
01. Basic Concepts/473456_01_02_3D15_Home_Dashboard.mp4 11.7 MB
16. Creating Drawing Views/473456_16_01_3D15_Initial_Drawing_Setup.mp4 11.3 MB
15. Assembly Visualizaion Techniques/473456_15_01_3D15_Material_Appearance.mp4 10.9 MB
03. Navigating the Interface/473456_03_04_3D15_Nav_Ribbon_Bar.mp4 10.7 MB
14. Using Constraints to Position Parts/473456_14_02_3D15_Angle.mp4 10.6 MB
10. Building Parts with Placed Features/473456_10_02_3D15_Sketched_Holes.mp4 10.4 MB
16. Creating Drawing Views/473456_16_05_3D15_Breakout_Views.mp4 10.1 MB
03. Navigating the Interface/473456_03_06_3D15_Nav_Marking_Menu.mp4 10.1 MB
11. Creating Patterns of Features/473456_11_05_3D15_Mirror_Feature_Solid.mp4 10.1 MB
07. Work Features/473456_07_02_3D15_Offset_Workplane.mp4 9.9 MB
12. Creating Sculpted Objects/473456_12_02_3D15_Creating_T_spline_Form.mp4 9.6 MB
01. Basic Concepts/473456_01_03_3D15_Reviewing_Different_File_Types.mp4 9.2 MB
17. Creating Basic Annotations/473456_17_02_3D15_Dimension_Precision.mp4 9.1 MB
14. Using Constraints to Position Parts/473456_14_03_3D15_Insert.mp4 8.6 MB
06. Modifying Sketch Geometry/473456_06_02_3D15_Offset.mp4 8.5 MB
04. Sketching Concepts/473456_04_02_3D15_Origin_Geometry.mp4 8.4 MB
16. Creating Drawing Views/473456_16_04_3D15_Detail_Views.mp4 8.1 MB
11. Creating Patterns of Features/473456_11_06_3D15_Sketch_Driven_Pattern.mp4 7.9 MB
12. Creating Sculpted Objects/473456_12_01_3D15_Tsplines_Introduction.mp4 7.8 MB
09. Understanding Part Modeling/473456_09_08_3D15_Sweep_Model_Edge.mp4 7.7 MB
14. Using Constraints to Position Parts/473456_14_07_3D15_Contact_Set.mp4 7.4 MB
11. Creating Patterns of Features/473456_11_04_3D15_Circular_Pattern.mp4 6.2 MB
18. Conclusion/473456_18_01_3D15_Next_Steps.mp4 6.1 MB
01. Basic Concepts/473456_01_01_XR15_MajorWorflowSteps.mp4 6.0 MB
11. Creating Patterns of Features/473456_11_03_3D15_Rectangular_Pattern_Curve.mp4 5.9 MB
13. Adding Parts to an Assembly File/473456_13_01_3D15_Assembly_Introduction.mp4 5.2 MB
00. Introduction/473456_00_01_WX30_Intro.mp4 4.9 MB
03. Navigating the Interface/473456_03_05_3D15_Nav_Quick_Access_Bar.mp4 4.6 MB
00. Introduction/473456_00_03_3D15_Certification.mp4 4.6 MB
00. Introduction/473456_00_04_3D15_Whats_New.mp4 3.7 MB
14. Using Constraints to Position Parts/473456_14_05_3D15_Translational_Constraint.mp4 3.6 MB
Exercise Files/03_Navigating the interface/03_01/Engine Block.ipt 2.0 MB
Exercise Files/03_Navigating the interface/03_02/Engine Block.ipt 2.0 MB
Exercise Files/03_Navigating the interface/03_03/Engine Block.ipt 2.0 MB
Exercise Files/03_Navigating the interface/03_04/Engine Block.ipt 2.0 MB
Exercise Files/03_Navigating the interface/03_05/Engine Block.ipt 2.0 MB
Exercise Files/03_Navigating the interface/03_06/Engine Block.ipt 2.0 MB
Exercise Files/15_Assembly visualization techniques/15_01/Engine Block.ipt 2.0 MB
Exercise Files/15_Assembly visualization techniques/15_02/Engine Block.ipt 2.0 MB
Exercise Files/15_Assembly visualization techniques/15_03/Engine Block.ipt 2.0 MB
Exercise Files/16_Creating drawing views/16_01/Engine Block.ipt 2.0 MB
Exercise Files/16_Creating drawing views/16_05/Engine Block.ipt 2.0 MB
Exercise Files/01_Basic concepts/01_03/Engine Block.ipt 2.0 MB
Exercise Files/16_Creating drawing views/16_02/Engine Block.ipt 2.0 MB
Exercise Files/16_Creating drawing views/16_03/Engine Block.ipt 2.0 MB
Exercise Files/16_Creating drawing views/16_04/Engine Block.ipt 2.0 MB
Exercise Files/17_Setting basic dimensions/17_01/Engine Block.ipt 2.0 MB
Exercise Files/17_Setting basic dimensions/17_02/Engine Block.ipt 2.0 MB
Exercise Files/17_Setting basic dimensions/17_03/Engine Block.ipt 2.0 MB
Exercise Files/15_Assembly visualization techniques/15_01/Engine.iam 1.8 MB
Exercise Files/03_Navigating the interface/03_04/Engine.iam 1.8 MB
Exercise Files/15_Assembly visualization techniques/15_02/Engine.iam 1.8 MB
Exercise Files/15_Assembly visualization techniques/15_03/Engine.iam 1.8 MB
Exercise Files/03_Navigating the interface/03_02/Engine.iam 1.8 MB
Exercise Files/03_Navigating the interface/03_03/Engine.iam 1.8 MB
Exercise Files/03_Navigating the interface/03_05/Engine.iam 1.8 MB
Exercise Files/03_Navigating the interface/03_06/Engine.iam 1.8 MB
Exercise Files/03_Navigating the interface/03_01/Engine.iam 1.8 MB
Exercise Files/16_Creating drawing views/16_01/Engine.iam 1.8 MB
Exercise Files/16_Creating drawing views/16_05/Engine.iam 1.8 MB
Exercise Files/01_Basic concepts/01_03/Engine.iam 1.8 MB
Exercise Files/15_Assembly visualization techniques/15_01/Engine - Blank Slate.iam 1.8 MB
Exercise Files/16_Creating drawing views/16_05/Engine - Break Out.idw 1.6 MB
00. Introduction/473456_00_02_3D15_Exercise_Files.mp4 1.4 MB
Exercise Files/03_Navigating the interface/03_01/Muffler.ipt 1.4 MB
Exercise Files/03_Navigating the interface/03_02/Muffler.ipt 1.4 MB
Exercise Files/03_Navigating the interface/03_03/Muffler.ipt 1.4 MB
Exercise Files/03_Navigating the interface/03_04/Muffler.ipt 1.4 MB
Exercise Files/03_Navigating the interface/03_05/Muffler.ipt 1.4 MB
Exercise Files/03_Navigating the interface/03_06/Muffler.ipt 1.4 MB
Exercise Files/15_Assembly visualization techniques/15_02/Muffler.ipt 1.4 MB
Exercise Files/15_Assembly visualization techniques/15_03/Muffler.ipt 1.4 MB
Exercise Files/16_Creating drawing views/16_01/Muffler.ipt 1.4 MB
Exercise Files/16_Creating drawing views/16_05/Muffler.ipt 1.4 MB
Exercise Files/01_Basic concepts/01_03/Muffler.ipt 1.4 MB
Exercise Files/15_Assembly visualization techniques/15_01/Muffler.ipt 1.4 MB
Exercise Files/15_Assembly visualization techniques/15_01/Prop.ipt 1.3 MB
Exercise Files/15_Assembly visualization techniques/15_02/Prop.ipt 1.3 MB
Exercise Files/15_Assembly visualization techniques/15_03/Prop.ipt 1.3 MB
Exercise Files/16_Creating drawing views/16_01/Prop.ipt 1.3 MB
Exercise Files/16_Creating drawing views/16_05/Prop.ipt 1.3 MB
Exercise Files/01_Basic concepts/01_03/Prop.ipt 1.3 MB
Exercise Files/03_Navigating the interface/03_01/Prop.ipt 1.3 MB
Exercise Files/03_Navigating the interface/03_02/Prop.ipt 1.3 MB
Exercise Files/03_Navigating the interface/03_03/Prop.ipt 1.3 MB
Exercise Files/03_Navigating the interface/03_04/Prop.ipt 1.3 MB
Exercise Files/03_Navigating the interface/03_05/Prop.ipt 1.3 MB
Exercise Files/03_Navigating the interface/03_06/Prop.ipt 1.3 MB
Exercise Files/01_Basic concepts/01_03/Engine.idw 1.1 MB
Exercise Files/03_Navigating the interface/03_01/Engine.idw 1.1 MB
Exercise Files/03_Navigating the interface/03_02/Engine.idw 1.1 MB
Exercise Files/03_Navigating the interface/03_03/Engine.idw 1.1 MB
Exercise Files/03_Navigating the interface/03_04/Engine.idw 1.1 MB
Exercise Files/03_Navigating the interface/03_05/Engine.idw 1.1 MB
Exercise Files/03_Navigating the interface/03_06/Engine.idw 1.1 MB
Exercise Files/15_Assembly visualization techniques/15_01/Engine.idw 1.1 MB
Exercise Files/15_Assembly visualization techniques/15_02/Engine.idw 1.1 MB
Exercise Files/15_Assembly visualization techniques/15_03/Engine.idw 1.1 MB
Exercise Files/16_Creating drawing views/16_01/Engine.idw 1.1 MB
Exercise Files/16_Creating drawing views/16_05/Engine.idw 1.1 MB
Exercise Files/16_Creating drawing views/16_03/Engine Block Section - COMPLETE.idw 880.0 KB
Exercise Files/01_Basic concepts/01_03/Muffler Tip.ipt 752.0 KB
Exercise Files/03_Navigating the interface/03_01/Muffler Tip.ipt 752.0 KB
Exercise Files/03_Navigating the interface/03_02/Muffler Tip.ipt 752.0 KB
Exercise Files/03_Navigating the interface/03_03/Muffler Tip.ipt 752.0 KB
Exercise Files/03_Navigating the interface/03_04/Muffler Tip.ipt 752.0 KB
Exercise Files/03_Navigating the interface/03_05/Muffler Tip.ipt 752.0 KB
Exercise Files/03_Navigating the interface/03_06/Muffler Tip.ipt 752.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Muffler Tip.ipt 752.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Muffler Tip.ipt 752.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Muffler Tip.ipt 752.0 KB
Exercise Files/16_Creating drawing views/16_01/Muffler Tip.ipt 752.0 KB
Exercise Files/16_Creating drawing views/16_05/Muffler Tip.ipt 752.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/High Quality Render - Fine.png 728.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/High Quality Render - Fine.png 728.0 KB
Exercise Files/16_Creating drawing views/16_04/Engine Block Detail - COMPLETE.idw 703.5 KB
Exercise Files/16_Creating drawing views/16_04/Engine Block Detail.idw 683.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Heat Sink.ipt 615.5 KB
Exercise Files/01_Basic concepts/01_03/Heat Sink.ipt 615.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Heat Sink.ipt 615.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Heat Sink.ipt 615.0 KB
Exercise Files/16_Creating drawing views/16_01/Heat Sink.ipt 615.0 KB
Exercise Files/16_Creating drawing views/16_05/Heat Sink.ipt 615.0 KB
Exercise Files/03_Navigating the interface/03_01/Heat Sink.ipt 614.5 KB
Exercise Files/03_Navigating the interface/03_02/Heat Sink.ipt 614.5 KB
Exercise Files/03_Navigating the interface/03_03/Heat Sink.ipt 614.5 KB
Exercise Files/03_Navigating the interface/03_04/Heat Sink.ipt 614.5 KB
Exercise Files/03_Navigating the interface/03_05/Heat Sink.ipt 614.5 KB
Exercise Files/03_Navigating the interface/03_06/Heat Sink.ipt 614.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Cone.ipt 421.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Cone.ipt 421.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Cone.ipt 421.5 KB
Exercise Files/16_Creating drawing views/16_01/Cone.ipt 421.5 KB
Exercise Files/01_Basic concepts/01_03/Cone.ipt 421.0 KB
Exercise Files/03_Navigating the interface/03_01/Cone.ipt 421.0 KB
Exercise Files/03_Navigating the interface/03_02/Cone.ipt 421.0 KB
Exercise Files/03_Navigating the interface/03_03/Cone.ipt 421.0 KB
Exercise Files/03_Navigating the interface/03_04/Cone.ipt 421.0 KB
Exercise Files/03_Navigating the interface/03_05/Cone.ipt 421.0 KB
Exercise Files/03_Navigating the interface/03_06/Cone.ipt 421.0 KB
Exercise Files/16_Creating drawing views/16_05/Cone.ipt 421.0 KB
Exercise Files/01_Basic concepts/01_03/Prop Mount.ipt 361.0 KB
Exercise Files/03_Navigating the interface/03_01/Prop Mount.ipt 361.0 KB
Exercise Files/03_Navigating the interface/03_02/Prop Mount.ipt 361.0 KB
Exercise Files/03_Navigating the interface/03_03/Prop Mount.ipt 361.0 KB
Exercise Files/03_Navigating the interface/03_04/Prop Mount.ipt 361.0 KB
Exercise Files/03_Navigating the interface/03_05/Prop Mount.ipt 361.0 KB
Exercise Files/03_Navigating the interface/03_06/Prop Mount.ipt 361.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Prop Mount.ipt 361.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Prop Mount.ipt 361.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Prop Mount.ipt 361.0 KB
Exercise Files/16_Creating drawing views/16_01/Prop Mount.ipt 361.0 KB
Exercise Files/16_Creating drawing views/16_05/Prop Mount.ipt 361.0 KB
Exercise Files/01_Basic concepts/01_03/Clutch Prop Mount.ipt 354.0 KB
Exercise Files/03_Navigating the interface/03_01/Clutch Prop Mount.ipt 354.0 KB
Exercise Files/03_Navigating the interface/03_02/Clutch Prop Mount.ipt 354.0 KB
Exercise Files/03_Navigating the interface/03_03/Clutch Prop Mount.ipt 354.0 KB
Exercise Files/03_Navigating the interface/03_04/Clutch Prop Mount.ipt 354.0 KB
Exercise Files/03_Navigating the interface/03_05/Clutch Prop Mount.ipt 354.0 KB
Exercise Files/03_Navigating the interface/03_06/Clutch Prop Mount.ipt 354.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Clutch Prop Mount.ipt 354.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Clutch Prop Mount.ipt 354.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Clutch Prop Mount.ipt 354.0 KB
Exercise Files/16_Creating drawing views/16_01/Clutch Prop Mount.ipt 354.0 KB
Exercise Files/16_Creating drawing views/16_05/Clutch Prop Mount.ipt 354.0 KB
Exercise Files/17_Setting basic dimensions/17_02/Engine Block Precision.idw 349.5 KB
Exercise Files/12_Creating sculpted objects/12_04/Modify Edges.ipt 338.0 KB
Exercise Files/17_Setting basic dimensions/17_01/Engine Block Dimensions.idw 332.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Starter Handle.ipt 317.5 KB
Exercise Files/01_Basic concepts/01_03/Starter Handle.ipt 317.0 KB
Exercise Files/03_Navigating the interface/03_01/Starter Handle.ipt 317.0 KB
Exercise Files/03_Navigating the interface/03_02/Starter Handle.ipt 317.0 KB
Exercise Files/03_Navigating the interface/03_03/Starter Handle.ipt 317.0 KB
Exercise Files/03_Navigating the interface/03_04/Starter Handle.ipt 317.0 KB
Exercise Files/03_Navigating the interface/03_05/Starter Handle.ipt 317.0 KB
Exercise Files/03_Navigating the interface/03_06/Starter Handle.ipt 317.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Starter Handle.ipt 317.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Starter Handle.ipt 317.0 KB
Exercise Files/16_Creating drawing views/16_01/Starter Handle.ipt 317.0 KB
Exercise Files/16_Creating drawing views/16_05/Starter Handle.ipt 317.0 KB
Exercise Files/12_Creating sculpted objects/12_03/Sculpted Form.ipt 310.0 KB
Exercise Files/01_Basic concepts/01_03/Starter Cover.ipt 279.5 KB
Exercise Files/03_Navigating the interface/03_01/Starter Cover.ipt 279.5 KB
Exercise Files/03_Navigating the interface/03_02/Starter Cover.ipt 279.5 KB
Exercise Files/03_Navigating the interface/03_03/Starter Cover.ipt 279.5 KB
Exercise Files/03_Navigating the interface/03_04/Starter Cover.ipt 279.5 KB
Exercise Files/03_Navigating the interface/03_05/Starter Cover.ipt 279.5 KB
Exercise Files/03_Navigating the interface/03_06/Starter Cover.ipt 279.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Starter Cover.ipt 279.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Starter Cover.ipt 279.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Starter Cover.ipt 279.5 KB
Exercise Files/16_Creating drawing views/16_01/Starter Cover.ipt 279.5 KB
Exercise Files/16_Creating drawing views/16_05/Starter Cover.ipt 279.5 KB
Exercise Files/05_Creating geometry/05_03/06_03_Computer_Mouse.ipt 276.0 KB
Exercise Files/09_Understanding part modeling - sketch feature/09_08/Oil Pan.ipt 270.0 KB
Exercise Files/17_Setting basic dimensions/17_03/Engine Block Baseline.idw 268.0 KB
Exercise Files/01_Basic concepts/01_03/Carburetor Housing_v3.idw 263.0 KB
Exercise Files/03_Navigating the interface/03_01/Carburetor Housing_v3.idw 263.0 KB
Exercise Files/03_Navigating the interface/03_02/Carburetor Housing_v3.idw 263.0 KB
Exercise Files/03_Navigating the interface/03_03/Carburetor Housing_v3.idw 263.0 KB
Exercise Files/03_Navigating the interface/03_04/Carburetor Housing_v3.idw 263.0 KB
Exercise Files/03_Navigating the interface/03_05/Carburetor Housing_v3.idw 263.0 KB
Exercise Files/03_Navigating the interface/03_06/Carburetor Housing_v3.idw 263.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Carburetor Housing_v3.idw 263.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Carburetor Housing_v3.idw 263.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Carburetor Housing_v3.idw 263.0 KB
Exercise Files/16_Creating drawing views/16_01/Carburetor Housing_v3.idw 263.0 KB
Exercise Files/16_Creating drawing views/16_05/Carburetor Housing_v3.idw 263.0 KB
Exercise Files/01_Basic concepts/01_03/Carburetor.iam 253.0 KB
Exercise Files/03_Navigating the interface/03_01/Carburetor.iam 253.0 KB
Exercise Files/03_Navigating the interface/03_02/Carburetor.iam 253.0 KB
Exercise Files/03_Navigating the interface/03_03/Carburetor.iam 253.0 KB
Exercise Files/03_Navigating the interface/03_04/Carburetor.iam 253.0 KB
Exercise Files/03_Navigating the interface/03_05/Carburetor.iam 253.0 KB
Exercise Files/03_Navigating the interface/03_06/Carburetor.iam 253.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Carburetor.iam 253.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Carburetor.iam 253.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Carburetor.iam 253.0 KB
Exercise Files/16_Creating drawing views/16_01/Carburetor.iam 253.0 KB
Exercise Files/16_Creating drawing views/16_05/Carburetor.iam 253.0 KB
Exercise Files/05_Creating geometry/05_02/06_02_Computer_Mouse.ipt 249.5 KB
Exercise Files/03_Navigating the interface/03_03/Carburetor Housing_v3.ipt 242.0 KB
Exercise Files/01_Basic concepts/01_03/Carburetor Housing_v3.ipt 241.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Carburetor Housing_v3.ipt 241.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Carburetor Housing_v3.ipt 241.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Carburetor Housing_v3.ipt 241.5 KB
Exercise Files/16_Creating drawing views/16_01/Carburetor Housing_v3.ipt 241.5 KB
Exercise Files/16_Creating drawing views/16_05/Carburetor Housing_v3.ipt 241.5 KB
Exercise Files/01_Basic concepts/01_03/Clutch Gear.ipt 241.0 KB
Exercise Files/03_Navigating the interface/03_01/Carburetor Housing_v3.ipt 241.0 KB
Exercise Files/03_Navigating the interface/03_01/Clutch Gear.ipt 241.0 KB
Exercise Files/03_Navigating the interface/03_02/Carburetor Housing_v3.ipt 241.0 KB
Exercise Files/03_Navigating the interface/03_02/Clutch Gear.ipt 241.0 KB
Exercise Files/03_Navigating the interface/03_03/Clutch Gear.ipt 241.0 KB
Exercise Files/03_Navigating the interface/03_04/Carburetor Housing_v3.ipt 241.0 KB
Exercise Files/03_Navigating the interface/03_04/Clutch Gear.ipt 241.0 KB
Exercise Files/03_Navigating the interface/03_05/Carburetor Housing_v3.ipt 241.0 KB
Exercise Files/03_Navigating the interface/03_05/Clutch Gear.ipt 241.0 KB
Exercise Files/03_Navigating the interface/03_06/Carburetor Housing_v3.ipt 241.0 KB
Exercise Files/03_Navigating the interface/03_06/Clutch Gear.ipt 241.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Clutch Gear.ipt 241.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Clutch Gear.ipt 241.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Clutch Gear.ipt 241.0 KB
Exercise Files/16_Creating drawing views/16_01/Clutch Gear.ipt 241.0 KB
Exercise Files/16_Creating drawing views/16_05/Clutch Gear.ipt 241.0 KB
Exercise Files/12_Creating sculpted objects/12_02/Base Form.ipt 238.5 KB
Exercise Files/12_Creating sculpted objects/12_03/Base Form.ipt 238.5 KB
Exercise Files/14_Using constraints to position parts/14_06/Gear.ipt 221.5 KB
Exercise Files/01_Basic concepts/01_03/Mixture Control.ipt 217.0 KB
Exercise Files/03_Navigating the interface/03_01/Mixture Control.ipt 217.0 KB
Exercise Files/03_Navigating the interface/03_02/Mixture Control.ipt 217.0 KB
Exercise Files/03_Navigating the interface/03_03/Mixture Control.ipt 217.0 KB
Exercise Files/03_Navigating the interface/03_04/Mixture Control.ipt 217.0 KB
Exercise Files/03_Navigating the interface/03_05/Mixture Control.ipt 217.0 KB
Exercise Files/03_Navigating the interface/03_06/Mixture Control.ipt 217.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Mixture Control.ipt 217.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Mixture Control.ipt 217.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Mixture Control.ipt 217.0 KB
Exercise Files/16_Creating drawing views/16_01/Mixture Control.ipt 217.0 KB
Exercise Files/16_Creating drawing views/16_05/Mixture Control.ipt 217.0 KB
Exercise Files/01_Basic concepts/01_03/Face Plate.ipt 212.0 KB
Exercise Files/03_Navigating the interface/03_01/Face Plate.ipt 212.0 KB
Exercise Files/03_Navigating the interface/03_02/Face Plate.ipt 212.0 KB
Exercise Files/03_Navigating the interface/03_03/Face Plate.ipt 212.0 KB
Exercise Files/03_Navigating the interface/03_04/Face Plate.ipt 212.0 KB
Exercise Files/03_Navigating the interface/03_05/Face Plate.ipt 212.0 KB
Exercise Files/03_Navigating the interface/03_06/Crankshaft Cover.ipt 212.0 KB
Exercise Files/03_Navigating the interface/03_06/Face Plate.ipt 212.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Crankshaft Cover.ipt 212.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Face Plate.ipt 212.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Crankshaft Cover.ipt 212.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Face Plate.ipt 212.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Crankshaft Cover.ipt 212.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Face Plate.ipt 212.0 KB
Exercise Files/16_Creating drawing views/16_01/Crankshaft Cover.ipt 212.0 KB
Exercise Files/16_Creating drawing views/16_01/Face Plate.ipt 212.0 KB
Exercise Files/16_Creating drawing views/16_05/Crankshaft Cover.ipt 212.0 KB
Exercise Files/16_Creating drawing views/16_05/Face Plate.ipt 212.0 KB
Exercise Files/01_Basic concepts/01_03/Crankshaft Cover.ipt 211.5 KB
Exercise Files/03_Navigating the interface/03_01/Crankshaft Cover.ipt 211.5 KB
Exercise Files/03_Navigating the interface/03_02/Crankshaft Cover.ipt 211.5 KB
Exercise Files/03_Navigating the interface/03_03/Crankshaft Cover.ipt 211.5 KB
Exercise Files/03_Navigating the interface/03_04/Crankshaft Cover.ipt 211.5 KB
Exercise Files/03_Navigating the interface/03_05/Crankshaft Cover.ipt 211.5 KB
Exercise Files/16_Creating drawing views/16_03/Engine Block Section.idw 211.5 KB
Exercise Files/08_Projecting and importing geometry/08_02/Importing AutoCAD Geometry.idw 209.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt 206.0 KB
Exercise Files/01_Basic concepts/01_03/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt 205.5 KB
Exercise Files/03_Navigating the interface/03_01/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt 205.5 KB
Exercise Files/03_Navigating the interface/03_02/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt 205.5 KB
Exercise Files/03_Navigating the interface/03_03/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt 205.5 KB
Exercise Files/03_Navigating the interface/03_04/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt 205.5 KB
Exercise Files/03_Navigating the interface/03_05/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt 205.5 KB
Exercise Files/03_Navigating the interface/03_06/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt 205.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt 205.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt 205.5 KB
Exercise Files/16_Creating drawing views/16_01/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt 205.5 KB
Exercise Files/16_Creating drawing views/16_05/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt 205.5 KB
Exercise Files/01_Basic concepts/01_03/Carburetor Housing.ipt 204.5 KB
Exercise Files/03_Navigating the interface/03_01/Carburetor Housing.ipt 204.5 KB
Exercise Files/03_Navigating the interface/03_02/Carburetor Housing.ipt 204.5 KB
Exercise Files/03_Navigating the interface/03_03/Carburetor Housing.ipt 204.5 KB
Exercise Files/03_Navigating the interface/03_04/Carburetor Housing.ipt 204.5 KB
Exercise Files/03_Navigating the interface/03_05/Carburetor Housing.ipt 204.5 KB
Exercise Files/03_Navigating the interface/03_06/Carburetor Housing.ipt 204.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Carburetor Housing.ipt 204.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Carburetor Housing.ipt 204.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Carburetor Housing.ipt 204.5 KB
Exercise Files/16_Creating drawing views/16_01/Carburetor Housing.ipt 204.5 KB
Exercise Files/16_Creating drawing views/16_05/Carburetor Housing.ipt 204.5 KB
Exercise Files/01_Basic concepts/01_03/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt 204.0 KB
Exercise Files/03_Navigating the interface/03_01/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt 204.0 KB
Exercise Files/03_Navigating the interface/03_02/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt 204.0 KB
Exercise Files/03_Navigating the interface/03_03/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt 204.0 KB
Exercise Files/03_Navigating the interface/03_04/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt 204.0 KB
Exercise Files/03_Navigating the interface/03_05/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt 204.0 KB
Exercise Files/03_Navigating the interface/03_06/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt 204.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt 204.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt 204.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt 204.0 KB
Exercise Files/16_Creating drawing views/16_01/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt 204.0 KB
Exercise Files/16_Creating drawing views/16_05/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt 204.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt 200.5 KB
Exercise Files/01_Basic concepts/01_03/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt 200.0 KB
Exercise Files/03_Navigating the interface/03_01/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt 200.0 KB
Exercise Files/03_Navigating the interface/03_02/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt 200.0 KB
Exercise Files/03_Navigating the interface/03_03/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt 200.0 KB
Exercise Files/03_Navigating the interface/03_04/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt 200.0 KB
Exercise Files/03_Navigating the interface/03_05/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt 200.0 KB
Exercise Files/03_Navigating the interface/03_06/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt 200.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt 200.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt 200.0 KB
Exercise Files/16_Creating drawing views/16_01/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt 200.0 KB
Exercise Files/16_Creating drawing views/16_05/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt 200.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt 194.0 KB
Exercise Files/01_Basic concepts/01_03/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt 193.5 KB
Exercise Files/03_Navigating the interface/03_01/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt 193.5 KB
Exercise Files/03_Navigating the interface/03_02/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt 193.5 KB
Exercise Files/03_Navigating the interface/03_03/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt 193.5 KB
Exercise Files/03_Navigating the interface/03_04/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt 193.5 KB
Exercise Files/03_Navigating the interface/03_05/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt 193.5 KB
Exercise Files/03_Navigating the interface/03_06/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt 193.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt 193.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt 193.5 KB
Exercise Files/16_Creating drawing views/16_01/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt 193.5 KB
Exercise Files/16_Creating drawing views/16_05/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt 193.5 KB
Exercise Files/01_Basic concepts/01_03/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt 186.5 KB
Exercise Files/03_Navigating the interface/03_01/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt 186.5 KB
Exercise Files/03_Navigating the interface/03_02/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt 186.5 KB
Exercise Files/03_Navigating the interface/03_03/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt 186.5 KB
Exercise Files/03_Navigating the interface/03_04/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt 186.5 KB
Exercise Files/03_Navigating the interface/03_05/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt 186.5 KB
Exercise Files/03_Navigating the interface/03_06/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt 186.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt 186.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt 186.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt 186.5 KB
Exercise Files/16_Creating drawing views/16_01/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt 186.5 KB
Exercise Files/16_Creating drawing views/16_05/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt 186.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Clutch Housing.ipt 186.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Clutch Housing.ipt 186.0 KB
Exercise Files/01_Basic concepts/01_03/Clutch Housing.ipt 185.5 KB
Exercise Files/03_Navigating the interface/03_01/Clutch Housing.ipt 185.5 KB
Exercise Files/03_Navigating the interface/03_02/Clutch Housing.ipt 185.5 KB
Exercise Files/03_Navigating the interface/03_03/Clutch Housing.ipt 185.5 KB
Exercise Files/03_Navigating the interface/03_04/Clutch Housing.ipt 185.5 KB
Exercise Files/03_Navigating the interface/03_05/Clutch Housing.ipt 185.5 KB
Exercise Files/03_Navigating the interface/03_06/Clutch Housing.ipt 185.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Clutch Housing.ipt 185.5 KB
Exercise Files/16_Creating drawing views/16_01/Clutch Housing.ipt 185.5 KB
Exercise Files/16_Creating drawing views/16_05/Clutch Housing.ipt 185.5 KB
Exercise Files/01_Basic concepts/01_03/Carburetor Housing_v2.ipt 184.0 KB
Exercise Files/03_Navigating the interface/03_01/Carburetor Housing_v2.ipt 184.0 KB
Exercise Files/03_Navigating the interface/03_02/Carburetor Housing_v2.ipt 184.0 KB
Exercise Files/03_Navigating the interface/03_03/Carburetor Housing_v2.ipt 184.0 KB
Exercise Files/03_Navigating the interface/03_04/Carburetor Housing_v2.ipt 184.0 KB
Exercise Files/03_Navigating the interface/03_05/Carburetor Housing_v2.ipt 184.0 KB
Exercise Files/03_Navigating the interface/03_06/Carburetor Housing_v2.ipt 184.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Carburetor Housing_v2.ipt 184.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Carburetor Housing_v2.ipt 184.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Carburetor Housing_v2.ipt 184.0 KB
Exercise Files/16_Creating drawing views/16_01/Carburetor Housing_v2.ipt 184.0 KB
Exercise Files/16_Creating drawing views/16_05/Carburetor Housing_v2.ipt 184.0 KB
Exercise Files/01_Basic concepts/01_03/Gas Regulator.ipt 183.5 KB
Exercise Files/03_Navigating the interface/03_01/Gas Regulator.ipt 183.5 KB
Exercise Files/03_Navigating the interface/03_02/Gas Regulator.ipt 183.5 KB
Exercise Files/03_Navigating the interface/03_03/Gas Regulator.ipt 183.5 KB
Exercise Files/03_Navigating the interface/03_04/Gas Regulator.ipt 183.5 KB
Exercise Files/03_Navigating the interface/03_05/Gas Regulator.ipt 183.5 KB
Exercise Files/03_Navigating the interface/03_06/Gas Regulator.ipt 183.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Gas Regulator.ipt 183.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Gas Regulator.ipt 183.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Gas Regulator.ipt 183.5 KB
Exercise Files/16_Creating drawing views/16_01/Gas Regulator.ipt 183.5 KB
Exercise Files/16_Creating drawing views/16_05/Gas Regulator.ipt 183.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/ANSI B18.2.2 - 1_4 - 20(3).ipt 179.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/ANSI B18.2.2 - 1_4 - 20(3).ipt 179.5 KB
Exercise Files/16_Creating drawing views/16_01/ANSI B18.2.2 - 1_4 - 20(3).ipt 179.5 KB
Exercise Files/01_Basic concepts/01_03/ANSI B18.2.2 - 1_4 - 20(3).ipt 179.0 KB
Exercise Files/03_Navigating the interface/03_01/ANSI B18.2.2 - 1_4 - 20(3).ipt 179.0 KB
Exercise Files/03_Navigating the interface/03_02/ANSI B18.2.2 - 1_4 - 20(3).ipt 179.0 KB
Exercise Files/03_Navigating the interface/03_03/ANSI B18.2.2 - 1_4 - 20(3).ipt 179.0 KB
Exercise Files/03_Navigating the interface/03_04/ANSI B18.2.2 - 1_4 - 20(3).ipt 179.0 KB
Exercise Files/03_Navigating the interface/03_05/ANSI B18.2.2 - 1_4 - 20(3).ipt 179.0 KB
Exercise Files/03_Navigating the interface/03_06/ANSI B18.2.2 - 1_4 - 20(3).ipt 179.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/ANSI B18.2.2 - 1_4 - 20(3).ipt 179.0 KB
Exercise Files/16_Creating drawing views/16_05/ANSI B18.2.2 - 1_4 - 20(3).ipt 179.0 KB
Exercise Files/03_Navigating the interface/03_03/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt 178.0 KB
Exercise Files/03_Navigating the interface/03_04/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt 178.0 KB
Exercise Files/03_Navigating the interface/03_05/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt 178.0 KB
Exercise Files/03_Navigating the interface/03_06/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt 178.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt 178.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt 178.0 KB
Exercise Files/16_Creating drawing views/16_01/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt 178.0 KB
Exercise Files/16_Creating drawing views/16_05/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt 178.0 KB
Exercise Files/03_Navigating the interface/03_01/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt 177.5 KB
Exercise Files/03_Navigating the interface/03_02/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt 177.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt 177.5 KB
Exercise Files/01_Basic concepts/01_03/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt 177.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Piston Shaft.ipt 177.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Piston Shaft.ipt 177.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Piston Shaft.ipt 177.0 KB
Exercise Files/16_Creating drawing views/16_05/Piston Shaft.ipt 177.0 KB
Exercise Files/01_Basic concepts/01_03/Piston Shaft.ipt 176.5 KB
Exercise Files/03_Navigating the interface/03_01/Piston Shaft.ipt 176.5 KB
Exercise Files/03_Navigating the interface/03_02/Piston Shaft.ipt 176.5 KB
Exercise Files/03_Navigating the interface/03_03/Piston Shaft.ipt 176.5 KB
Exercise Files/03_Navigating the interface/03_04/Piston Shaft.ipt 176.5 KB
Exercise Files/03_Navigating the interface/03_05/Piston Shaft.ipt 176.5 KB
Exercise Files/03_Navigating the interface/03_06/Piston Shaft.ipt 176.5 KB
Exercise Files/16_Creating drawing views/16_01/Piston Shaft.ipt 176.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Crankshaft.ipt 175.5 KB
Exercise Files/16_Creating drawing views/16_01/Crankshaft.ipt 175.5 KB
Exercise Files/01_Basic concepts/01_03/Crankshaft.ipt 175.0 KB
Exercise Files/03_Navigating the interface/03_01/Crankshaft.ipt 175.0 KB
Exercise Files/03_Navigating the interface/03_02/Crankshaft.ipt 175.0 KB
Exercise Files/03_Navigating the interface/03_03/Crankshaft.ipt 175.0 KB
Exercise Files/03_Navigating the interface/03_04/Crankshaft.ipt 175.0 KB
Exercise Files/03_Navigating the interface/03_05/Crankshaft.ipt 175.0 KB
Exercise Files/03_Navigating the interface/03_06/Crankshaft.ipt 175.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Crankshaft.ipt 175.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Crankshaft.ipt 175.0 KB
Exercise Files/16_Creating drawing views/16_05/Crankshaft.ipt 175.0 KB
Exercise Files/09_Understanding part modeling - sketch feature/09_05/Loft.ipt 171.0 KB
Exercise Files/09_Understanding part modeling - sketch feature/09_06/Loft.ipt 171.0 KB
Exercise Files/10_Understanding part modeling - placed features/10_05/Bottle.ipt 171.0 KB
Exercise Files/03_Navigating the interface/03_02/Fuel Adjuster.ipt 169.5 KB
Exercise Files/03_Navigating the interface/03_04/Fuel Adjuster.ipt 169.5 KB
Exercise Files/03_Navigating the interface/03_06/Fuel Adjuster.ipt 169.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Fuel Adjuster.ipt 169.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Fuel Adjuster.ipt 169.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Fuel Adjuster.ipt 169.5 KB
Exercise Files/16_Creating drawing views/16_01/Fuel Adjuster.ipt 169.5 KB
Exercise Files/16_Creating drawing views/16_05/Fuel Adjuster.ipt 169.5 KB
Exercise Files/01_Basic concepts/01_03/Fuel Adjuster.ipt 169.0 KB
Exercise Files/03_Navigating the interface/03_01/Fuel Adjuster.ipt 169.0 KB
Exercise Files/03_Navigating the interface/03_03/Fuel Adjuster.ipt 169.0 KB
Exercise Files/03_Navigating the interface/03_05/Fuel Adjuster.ipt 169.0 KB
Exercise Files/01_Basic concepts/01_03/Fuel Intake.ipt 167.0 KB
Exercise Files/03_Navigating the interface/03_01/Fuel Intake.ipt 167.0 KB
Exercise Files/03_Navigating the interface/03_02/Fuel Intake.ipt 167.0 KB
Exercise Files/03_Navigating the interface/03_03/Fuel Intake.ipt 167.0 KB
Exercise Files/03_Navigating the interface/03_04/Fuel Intake.ipt 167.0 KB
Exercise Files/03_Navigating the interface/03_05/Fuel Intake.ipt 167.0 KB
Exercise Files/03_Navigating the interface/03_06/Fuel Intake.ipt 167.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Fuel Intake.ipt 167.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Fuel Intake.ipt 167.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Fuel Intake.ipt 167.0 KB
Exercise Files/16_Creating drawing views/16_01/Fuel Intake.ipt 167.0 KB
Exercise Files/16_Creating drawing views/16_05/Fuel Intake.ipt 167.0 KB
Exercise Files/01_Basic concepts/01_03/Brake Pad.ipt 160.5 KB
Exercise Files/03_Navigating the interface/03_01/Brake Pad.ipt 160.5 KB
Exercise Files/03_Navigating the interface/03_02/Brake Pad.ipt 160.5 KB
Exercise Files/03_Navigating the interface/03_03/Brake Pad.ipt 160.5 KB
Exercise Files/03_Navigating the interface/03_04/Brake Pad.ipt 160.5 KB
Exercise Files/03_Navigating the interface/03_05/Brake Pad.ipt 160.5 KB
Exercise Files/03_Navigating the interface/03_06/Brake Pad.ipt 160.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Brake Pad.ipt 160.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Brake Pad.ipt 160.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Brake Pad.ipt 160.5 KB
Exercise Files/16_Creating drawing views/16_01/Brake Pad.ipt 160.5 KB
Exercise Files/16_Creating drawing views/16_05/Brake Pad.ipt 160.5 KB
Exercise Files/14_Using constraints to position parts/14_01/Universal Joint.iam 159.0 KB
Exercise Files/13_Adding parts to an assembly file/13_01/Universal Joint.iam 158.0 KB
Exercise Files/13_Adding parts to an assembly file/13_02/Universal Joint.iam 157.5 KB
Exercise Files/13_Adding parts to an assembly file/13_03/Universal Joint.iam 157.5 KB
Exercise Files/14_Using constraints to position parts/14_01/Handle.ipt 153.5 KB
Exercise Files/10_Understanding part modeling - placed features/10_01/Holes Complete.ipt 153.0 KB
Exercise Files/10_Understanding part modeling - placed features/10_02/Holes Complete.ipt 153.0 KB
Exercise Files/10_Understanding part modeling - placed features/10_03/Holes Complete.ipt 153.0 KB
Exercise Files/01_Basic concepts/01_03/Clutch Sleeve14.ipt 151.5 KB
Exercise Files/03_Navigating the interface/03_01/Clutch Sleeve14.ipt 151.5 KB
Exercise Files/03_Navigating the interface/03_02/Clutch Sleeve14.ipt 151.5 KB
Exercise Files/03_Navigating the interface/03_03/Clutch Sleeve14.ipt 151.5 KB
Exercise Files/03_Navigating the interface/03_04/Clutch Sleeve14.ipt 151.5 KB
Exercise Files/03_Navigating the interface/03_05/Clutch Sleeve14.ipt 151.5 KB
Exercise Files/03_Navigating the interface/03_06/Clutch Sleeve14.ipt 151.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Clutch Sleeve14.ipt 151.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Clutch Sleeve14.ipt 151.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Clutch Sleeve14.ipt 151.5 KB
Exercise Files/16_Creating drawing views/16_01/Clutch Sleeve14.ipt 151.5 KB
Exercise Files/16_Creating drawing views/16_05/Clutch Sleeve14.ipt 151.5 KB
Exercise Files/14_Using constraints to position parts/14_02/Joint.ipt 146.5 KB
Exercise Files/14_Using constraints to position parts/14_03/Joint.ipt 146.5 KB
Exercise Files/03_Navigating the interface/03_01/Air Adjuster.ipt 144.5 KB
Exercise Files/03_Navigating the interface/03_02/Air Adjuster.ipt 144.5 KB
Exercise Files/03_Navigating the interface/03_03/Air Adjuster.ipt 144.5 KB
Exercise Files/03_Navigating the interface/03_04/Air Adjuster.ipt 144.5 KB
Exercise Files/03_Navigating the interface/03_05/Air Adjuster.ipt 144.5 KB
Exercise Files/03_Navigating the interface/03_06/Air Adjuster.ipt 144.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Air Adjuster.ipt 144.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Air Adjuster.ipt 144.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Air Adjuster.ipt 144.5 KB
Exercise Files/16_Creating drawing views/16_01/Air Adjuster.ipt 144.5 KB
Exercise Files/16_Creating drawing views/16_05/Air Adjuster.ipt 144.5 KB
Exercise Files/01_Basic concepts/01_03/Air Adjuster.ipt 144.0 KB
Exercise Files/13_Adding parts to an assembly file/13_01/Joint.ipt 144.0 KB
Exercise Files/13_Adding parts to an assembly file/13_02/Joint.ipt 144.0 KB
Exercise Files/13_Adding parts to an assembly file/13_03/Joint.ipt 144.0 KB
Exercise Files/14_Using constraints to position parts/14_01/Joint.ipt 144.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Piston.ipt 144.0 KB
Exercise Files/16_Creating drawing views/16_05/Piston.ipt 144.0 KB
Exercise Files/01_Basic concepts/01_03/Piston.ipt 143.5 KB
Exercise Files/03_Navigating the interface/03_02/Piston.ipt 143.5 KB
Exercise Files/03_Navigating the interface/03_03/Piston.ipt 143.5 KB
Exercise Files/03_Navigating the interface/03_05/Piston.ipt 143.5 KB
Exercise Files/03_Navigating the interface/03_06/Piston.ipt 143.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Piston.ipt 143.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Piston.ipt 143.5 KB
Exercise Files/16_Creating drawing views/16_01/Piston.ipt 143.5 KB
Exercise Files/03_Navigating the interface/03_01/Piston.ipt 143.0 KB
Exercise Files/03_Navigating the interface/03_04/Piston.ipt 143.0 KB
Exercise Files/10_Understanding part modeling - placed features/10_03/Holes.ipt 142.5 KB
Exercise Files/01_Basic concepts/01_03/Fuel Intake Adjuster Pin.ipt 138.5 KB
Exercise Files/03_Navigating the interface/03_01/Fuel Intake Adjuster Pin.ipt 138.5 KB
Exercise Files/03_Navigating the interface/03_02/Fuel Intake Adjuster Pin.ipt 138.5 KB
Exercise Files/03_Navigating the interface/03_03/Fuel Intake Adjuster Pin.ipt 138.5 KB
Exercise Files/03_Navigating the interface/03_04/Fuel Intake Adjuster Pin.ipt 138.5 KB
Exercise Files/03_Navigating the interface/03_05/Fuel Intake Adjuster Pin.ipt 138.5 KB
Exercise Files/03_Navigating the interface/03_06/Fuel Intake Adjuster Pin.ipt 138.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Fuel Intake Adjuster Pin.ipt 138.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Fuel Intake Adjuster Pin.ipt 138.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Fuel Intake Adjuster Pin.ipt 138.5 KB
Exercise Files/16_Creating drawing views/16_01/Fuel Intake Adjuster Pin.ipt 138.5 KB
Exercise Files/16_Creating drawing views/16_05/Fuel Intake Adjuster Pin.ipt 138.5 KB
Exercise Files/10_Understanding part modeling - placed features/10_04/Fillet Chamfer Complete.ipt 136.5 KB
Exercise Files/16_Creating drawing views/16_05/Clutch Bearing.ipt 134.0 KB
Exercise Files/01_Basic concepts/01_03/Clutch Bearing.ipt 133.5 KB
Exercise Files/03_Navigating the interface/03_01/Clutch Bearing.ipt 133.5 KB
Exercise Files/03_Navigating the interface/03_02/Clutch Bearing.ipt 133.5 KB
Exercise Files/03_Navigating the interface/03_03/Clutch Bearing.ipt 133.5 KB
Exercise Files/03_Navigating the interface/03_04/Clutch Bearing.ipt 133.5 KB
Exercise Files/03_Navigating the interface/03_05/Clutch Bearing.ipt 133.5 KB
Exercise Files/03_Navigating the interface/03_06/Clutch Bearing.ipt 133.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Clutch Bearing.ipt 133.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Clutch Bearing.ipt 133.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Clutch Bearing.ipt 133.5 KB
Exercise Files/16_Creating drawing views/16_01/Clutch Bearing.ipt 133.5 KB
Exercise Files/01_Basic concepts/01_03/Beveled Sleeve.ipt 131.0 KB
Exercise Files/01_Basic concepts/01_03/Hex Cap.ipt 131.0 KB
Exercise Files/03_Navigating the interface/03_01/Beveled Sleeve.ipt 131.0 KB
Exercise Files/03_Navigating the interface/03_01/Hex Cap.ipt 131.0 KB
Exercise Files/03_Navigating the interface/03_02/Beveled Sleeve.ipt 131.0 KB
Exercise Files/03_Navigating the interface/03_02/Hex Cap.ipt 131.0 KB
Exercise Files/03_Navigating the interface/03_03/Beveled Sleeve.ipt 131.0 KB
Exercise Files/03_Navigating the interface/03_03/Hex Cap.ipt 131.0 KB
Exercise Files/03_Navigating the interface/03_04/Beveled Sleeve.ipt 131.0 KB
Exercise Files/03_Navigating the interface/03_04/Hex Cap.ipt 131.0 KB
Exercise Files/03_Navigating the interface/03_05/Beveled Sleeve.ipt 131.0 KB
Exercise Files/03_Navigating the interface/03_05/Hex Cap.ipt 131.0 KB
Exercise Files/03_Navigating the interface/03_06/Beveled Sleeve.ipt 131.0 KB
Exercise Files/03_Navigating the interface/03_06/Hex Cap.ipt 131.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Beveled Sleeve.ipt 131.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Hex Cap.ipt 131.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Beveled Sleeve.ipt 131.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Hex Cap.ipt 131.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Beveled Sleeve.ipt 131.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Hex Cap.ipt 131.0 KB
Exercise Files/16_Creating drawing views/16_01/Beveled Sleeve.ipt 131.0 KB
Exercise Files/16_Creating drawing views/16_01/Hex Cap.ipt 131.0 KB
Exercise Files/16_Creating drawing views/16_05/Beveled Sleeve.ipt 131.0 KB
Exercise Files/16_Creating drawing views/16_05/Hex Cap.ipt 131.0 KB
Exercise Files/13_Adding parts to an assembly file/13_01/base.ipt 128.0 KB
Exercise Files/13_Adding parts to an assembly file/13_02/base.ipt 128.0 KB
Exercise Files/13_Adding parts to an assembly file/13_03/base.ipt 128.0 KB
Exercise Files/14_Using constraints to position parts/14_01/base.ipt 128.0 KB
Exercise Files/14_Using constraints to position parts/14_06/Gears - Complete.iam 126.5 KB
Exercise Files/10_Understanding part modeling - placed features/10_02/Holes.ipt 125.5 KB
Exercise Files/14_Using constraints to position parts/14_06/Gears.iam 125.0 KB
Exercise Files/01_Basic concepts/01_03/Screw Lock.ipt 124.5 KB
Exercise Files/03_Navigating the interface/03_01/Screw Lock.ipt 124.5 KB
Exercise Files/03_Navigating the interface/03_02/Screw Lock.ipt 124.5 KB
Exercise Files/03_Navigating the interface/03_03/Screw Lock.ipt 124.5 KB
Exercise Files/03_Navigating the interface/03_04/Screw Lock.ipt 124.5 KB
Exercise Files/03_Navigating the interface/03_05/Screw Lock.ipt 124.5 KB
Exercise Files/03_Navigating the interface/03_06/Screw Lock.ipt 124.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Screw Lock.ipt 124.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Screw Lock.ipt 124.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Screw Lock.ipt 124.5 KB
Exercise Files/16_Creating drawing views/16_01/Screw Lock.ipt 124.5 KB
Exercise Files/16_Creating drawing views/16_05/Screw Lock.ipt 124.5 KB
Exercise Files/11_Creating feature patterns/11_05/Mirror.ipt 124.0 KB
Exercise Files/01_Basic concepts/01_03/Horseshoe Clip.ipt 123.5 KB
Exercise Files/03_Navigating the interface/03_01/Horseshoe Clip.ipt 123.5 KB
Exercise Files/03_Navigating the interface/03_02/Horseshoe Clip.ipt 123.5 KB
Exercise Files/03_Navigating the interface/03_03/Horseshoe Clip.ipt 123.5 KB
Exercise Files/03_Navigating the interface/03_04/Horseshoe Clip.ipt 123.5 KB
Exercise Files/03_Navigating the interface/03_05/Horseshoe Clip.ipt 123.5 KB
Exercise Files/03_Navigating the interface/03_06/Horseshoe Clip.ipt 123.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Horseshoe Clip.ipt 123.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Horseshoe Clip.ipt 123.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Horseshoe Clip.ipt 123.5 KB
Exercise Files/16_Creating drawing views/16_01/Horseshoe Clip.ipt 123.5 KB
Exercise Files/16_Creating drawing views/16_05/Horseshoe Clip.ipt 123.5 KB
Exercise Files/14_Using constraints to position parts/14_05/Cam.ipt 120.5 KB
Exercise Files/13_Adding parts to an assembly file/13_01/Crank Handle.ipt 118.0 KB
Exercise Files/13_Adding parts to an assembly file/13_02/Crank Handle.ipt 118.0 KB
Exercise Files/13_Adding parts to an assembly file/13_03/Crank Handle.ipt 118.0 KB
Exercise Files/14_Using constraints to position parts/14_01/Crank Handle.ipt 118.0 KB
Exercise Files/10_Understanding part modeling - placed features/10_01/Holes.ipt 117.0 KB
Exercise Files/01_Basic concepts/01_03/Clutch Sleeve11.ipt 114.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Clutch Sleeve11.ipt 114.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Clutch Sleeve11.ipt 114.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Clutch Sleeve11.ipt 114.5 KB
Exercise Files/16_Creating drawing views/16_01/Clutch Sleeve11.ipt 114.5 KB
Exercise Files/16_Creating drawing views/16_05/Clutch Sleeve11.ipt 114.5 KB
Exercise Files/03_Navigating the interface/03_01/Clutch Sleeve11.ipt 114.0 KB
Exercise Files/03_Navigating the interface/03_02/Clutch Sleeve11.ipt 114.0 KB
Exercise Files/03_Navigating the interface/03_03/Clutch Sleeve11.ipt 114.0 KB
Exercise Files/03_Navigating the interface/03_04/Clutch Sleeve11.ipt 114.0 KB
Exercise Files/03_Navigating the interface/03_05/Clutch Sleeve11.ipt 114.0 KB
Exercise Files/03_Navigating the interface/03_06/Clutch Sleeve11.ipt 114.0 KB
Exercise Files/13_Adding parts to an assembly file/13_01/Connector.ipt 113.5 KB
Exercise Files/13_Adding parts to an assembly file/13_02/Connector.ipt 113.5 KB
Exercise Files/13_Adding parts to an assembly file/13_03/Connector.ipt 113.0 KB
Exercise Files/14_Using constraints to position parts/14_01/Connector.ipt 113.0 KB
Exercise Files/03_Navigating the interface/03_01/Pulley Shaft.ipt 112.5 KB
Exercise Files/03_Navigating the interface/03_02/Pulley Shaft.ipt 112.5 KB
Exercise Files/03_Navigating the interface/03_03/Pulley Shaft.ipt 112.5 KB
Exercise Files/03_Navigating the interface/03_04/Pulley Shaft.ipt 112.5 KB
Exercise Files/03_Navigating the interface/03_05/Pulley Shaft.ipt 112.5 KB
Exercise Files/03_Navigating the interface/03_06/Pulley Shaft.ipt 112.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Pulley Shaft.ipt 112.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Pulley Shaft.ipt 112.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Pulley Shaft.ipt 112.5 KB
Exercise Files/16_Creating drawing views/16_01/Pulley Shaft.ipt 112.5 KB
Exercise Files/16_Creating drawing views/16_05/Pulley Shaft.ipt 112.5 KB
Exercise Files/01_Basic concepts/01_03/Pulley Shaft.ipt 112.0 KB
Exercise Files/01_Basic concepts/01_03/Sleeve.ipt 112.0 KB
Exercise Files/03_Navigating the interface/03_01/Sleeve.ipt 112.0 KB
Exercise Files/03_Navigating the interface/03_02/Sleeve.ipt 112.0 KB
Exercise Files/03_Navigating the interface/03_03/Sleeve.ipt 112.0 KB
Exercise Files/03_Navigating the interface/03_04/Sleeve.ipt 112.0 KB
Exercise Files/03_Navigating the interface/03_05/Sleeve.ipt 112.0 KB
Exercise Files/03_Navigating the interface/03_06/Sleeve.ipt 112.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Sleeve.ipt 112.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Sleeve.ipt 112.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Sleeve.ipt 112.0 KB
Exercise Files/16_Creating drawing views/16_01/Sleeve.ipt 112.0 KB
Exercise Files/16_Creating drawing views/16_05/Sleeve.ipt 112.0 KB
Exercise Files/10_Understanding part modeling - placed features/10_04/Fillet Chamfer.ipt 111.0 KB
Exercise Files/14_Using constraints to position parts/14_05/Arm.ipt 109.5 KB
Exercise Files/14_Using constraints to position parts/14_07/Slider.ipt 108.5 KB
Exercise Files/08_Projecting and importing geometry/08_02/Importing AutoCAD Geometry.ipt 108.0 KB
Exercise Files/11_Creating feature patterns/11_02/Rectangular Pattern Parameters.ipt 107.0 KB
Exercise Files/14_Using constraints to position parts/14_06/Threaded Shaft.ipt 106.0 KB
Exercise Files/11_Creating feature patterns/11_04/Circular Pattern.ipt 105.0 KB
Exercise Files/13_Adding parts to an assembly file/13_01/Pin.ipt 104.5 KB
Exercise Files/13_Adding parts to an assembly file/13_02/Pin.ipt 104.5 KB
Exercise Files/14_Using constraints to position parts/14_01/Pin.ipt 104.5 KB
Exercise Files/01_Basic concepts/01_03/Washer.ipt 104.0 KB
Exercise Files/03_Navigating the interface/03_01/Washer.ipt 104.0 KB
Exercise Files/03_Navigating the interface/03_02/Washer.ipt 104.0 KB
Exercise Files/03_Navigating the interface/03_03/Washer.ipt 104.0 KB
Exercise Files/03_Navigating the interface/03_04/Washer.ipt 104.0 KB
Exercise Files/03_Navigating the interface/03_05/Washer.ipt 104.0 KB
Exercise Files/03_Navigating the interface/03_06/Washer.ipt 104.0 KB
Exercise Files/13_Adding parts to an assembly file/13_03/Pin.ipt 104.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Washer.ipt 104.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Washer.ipt 104.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Washer.ipt 104.0 KB
Exercise Files/16_Creating drawing views/16_01/Washer.ipt 104.0 KB
Exercise Files/16_Creating drawing views/16_05/Washer.ipt 104.0 KB
Exercise Files/14_Using constraints to position parts/14_05/Cam Follower - Complete.iam 103.5 KB
Exercise Files/14_Using constraints to position parts/14_05/Base.ipt 103.0 KB
Exercise Files/14_Using constraints to position parts/14_05/Cam Follower.iam 101.0 KB
Exercise Files/13_Adding parts to an assembly file/13_04/Base Plate.ipt 100.5 KB
Exercise Files/14_Using constraints to position parts/14_04/Base.ipt 99.0 KB
Exercise Files/01_Basic concepts/01_03/Crank Arm.ipt 98.5 KB
Exercise Files/03_Navigating the interface/03_01/Crank Arm.ipt 98.5 KB
Exercise Files/03_Navigating the interface/03_02/Crank Arm.ipt 98.5 KB
Exercise Files/03_Navigating the interface/03_03/Crank Arm.ipt 98.5 KB
Exercise Files/03_Navigating the interface/03_04/Crank Arm.ipt 98.5 KB
Exercise Files/03_Navigating the interface/03_05/Crank Arm.ipt 98.5 KB
Exercise Files/03_Navigating the interface/03_06/Crank Arm.ipt 98.5 KB
Exercise Files/13_Adding parts to an assembly file/13_04/Content Center.iam 98.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Crank Arm.ipt 98.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Crank Arm.ipt 98.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Crank Arm.ipt 98.5 KB
Exercise Files/16_Creating drawing views/16_01/Crank Arm.ipt 98.5 KB
Exercise Files/16_Creating drawing views/16_05/Crank Arm.ipt 98.5 KB
Exercise Files/01_Basic concepts/01_03/Engine.ipn 98.0 KB
Exercise Files/03_Navigating the interface/03_01/Engine.ipn 98.0 KB
Exercise Files/03_Navigating the interface/03_02/Engine.ipn 98.0 KB
Exercise Files/03_Navigating the interface/03_03/Engine.ipn 98.0 KB
Exercise Files/03_Navigating the interface/03_04/Engine.ipn 98.0 KB
Exercise Files/03_Navigating the interface/03_05/Engine.ipn 98.0 KB
Exercise Files/03_Navigating the interface/03_06/Engine.ipn 98.0 KB
Exercise Files/14_Using constraints to position parts/14_02/Universal Shaft Angle.iam 98.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/Engine.ipn 98.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/Engine.ipn 98.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/Engine.ipn 98.0 KB
Exercise Files/16_Creating drawing views/16_01/Engine.ipn 98.0 KB
Exercise Files/16_Creating drawing views/16_05/Engine.ipn 98.0 KB
Exercise Files/11_Creating feature patterns/11_03/Rectangular Pattern Curve.ipt 96.5 KB
Exercise Files/13_Adding parts to an assembly file/13_04/Block.ipt 96.5 KB
Exercise Files/14_Using constraints to position parts/14_02/Connecting Rod.ipt 96.5 KB
Exercise Files/14_Using constraints to position parts/14_03/Connecting Rod.ipt 96.0 KB
Exercise Files/14_Using constraints to position parts/14_03/Universal Shaft Start.iam 96.0 KB
Exercise Files/14_Using constraints to position parts/14_04/Slide.ipt 93.5 KB
Exercise Files/09_Understanding part modeling - sketch feature/09_03/To Next Termination.ipt 92.5 KB
Exercise Files/13_Adding parts to an assembly file/13_01/Connecting Rod.ipt 92.5 KB
Exercise Files/13_Adding parts to an assembly file/13_02/Connecting Rod.ipt 92.5 KB
Exercise Files/14_Using constraints to position parts/14_01/Connecting Rod.ipt 92.5 KB
Exercise Files/07_Work features/07_02/Work Planes.ipt 92.0 KB
Exercise Files/07_Work features/07_03/Work Planes.ipt 92.0 KB
Exercise Files/07_Work features/07_04/Work Planes.ipt 92.0 KB
Exercise Files/13_Adding parts to an assembly file/13_03/Connecting Rod.ipt 92.0 KB
Exercise Files/14_Using constraints to position parts/14_06/Linear Stage.ipt 91.5 KB
Exercise Files/11_Creating feature patterns/11_01/Rectangular Pattern.ipt 89.5 KB
Exercise Files/04_Sketching concepts and settings/04_03/Sketch Practice.ipt 88.5 KB
Exercise Files/01_Basic concepts/01_03/Engine_v2.ipn 87.5 KB
Exercise Files/03_Navigating the interface/03_01/Engine_v2.ipn 87.5 KB
Exercise Files/03_Navigating the interface/03_02/Engine_v2.ipn 87.5 KB
Exercise Files/03_Navigating the interface/03_03/Engine_v2.ipn 87.5 KB
Exercise Files/03_Navigating the interface/03_04/Engine_v2.ipn 87.5 KB
Exercise Files/03_Navigating the interface/03_05/Engine_v2.ipn 87.5 KB
Exercise Files/03_Navigating the interface/03_06/Engine_v2.ipn 87.5 KB
Exercise Files/11_Creating feature patterns/11_06/Sketch Pattern.ipt 87.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Engine_v2.ipn 87.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Engine_v2.ipn 87.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Engine_v2.ipn 87.5 KB
Exercise Files/16_Creating drawing views/16_01/Engine_v2.ipn 87.5 KB
Exercise Files/16_Creating drawing views/16_05/Engine_v2.ipn 87.5 KB
Exercise Files/06_Editing sketch geometry/06_01/Move Copy Rotate.ipt 87.0 KB
Exercise Files/14_Using constraints to position parts/14_04/Drive Constraints.iam 86.5 KB
Exercise Files/08_Projecting and importing geometry/08_01/Projecting Geometry.ipt 85.5 KB
Exercise Files/14_Using constraints to position parts/14_01/Universal Shaft.iam 85.0 KB
Exercise Files/03_Navigating the interface/03_02/Piston Pin.ipt 84.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Piston Pin.ipt 84.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Piston Pin.ipt 84.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Piston Pin.ipt 84.5 KB
Exercise Files/16_Creating drawing views/16_05/Piston Pin.ipt 84.5 KB
Exercise Files/01_Basic concepts/01_03/Piston Pin.ipt 84.0 KB
Exercise Files/03_Navigating the interface/03_01/Piston Pin.ipt 84.0 KB
Exercise Files/03_Navigating the interface/03_03/Piston Pin.ipt 84.0 KB
Exercise Files/03_Navigating the interface/03_04/Piston Pin.ipt 84.0 KB
Exercise Files/03_Navigating the interface/03_05/Piston Pin.ipt 84.0 KB
Exercise Files/03_Navigating the interface/03_06/Piston Pin.ipt 84.0 KB
Exercise Files/16_Creating drawing views/16_01/Piston Pin.ipt 84.0 KB
Exercise Files/13_Adding parts to an assembly file/13_01/Crank Rod.ipt 83.5 KB
Exercise Files/13_Adding parts to an assembly file/13_02/Crank Rod.ipt 83.5 KB
Exercise Files/13_Adding parts to an assembly file/13_03/Crank Rod.ipt 83.5 KB
Exercise Files/14_Using constraints to position parts/14_01/Crank Rod.ipt 83.5 KB
Exercise Files/14_Using constraints to position parts/14_07/Sliders - Complete.iam 83.5 KB
Exercise Files/14_Using constraints to position parts/14_07/Sliders.iam 83.5 KB
Exercise Files/01_Basic concepts/01_03/Heat Sink v2.ipt 82.5 KB
Exercise Files/03_Navigating the interface/03_01/Heat Sink v2.ipt 82.5 KB
Exercise Files/03_Navigating the interface/03_02/Heat Sink v2.ipt 82.5 KB
Exercise Files/03_Navigating the interface/03_03/Heat Sink v2.ipt 82.5 KB
Exercise Files/03_Navigating the interface/03_04/Heat Sink v2.ipt 82.5 KB
Exercise Files/03_Navigating the interface/03_05/Heat Sink v2.ipt 82.5 KB
Exercise Files/03_Navigating the interface/03_06/Heat Sink v2.ipt 82.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/Heat Sink v2.ipt 82.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/Heat Sink v2.ipt 82.5 KB
Exercise Files/15_Assembly visualization techniques/15_03/Heat Sink v2.ipt 82.5 KB
Exercise Files/16_Creating drawing views/16_01/Heat Sink v2.ipt 82.5 KB
Exercise Files/16_Creating drawing views/16_05/Heat Sink v2.ipt 82.5 KB
Exercise Files/03_Navigating the interface/03_01/washer4.ipt 80.5 KB
Exercise Files/03_Navigating the interface/03_03/washer4.ipt 80.5 KB
Exercise Files/03_Navigating the interface/03_06/washer4.ipt 80.5 KB
Exercise Files/15_Assembly visualization techniques/15_01/washer4.ipt 80.5 KB
Exercise Files/15_Assembly visualization techniques/15_02/washer4.ipt 80.5 KB
Exercise Files/16_Creating drawing views/16_01/washer4.ipt 80.5 KB
Exercise Files/16_Creating drawing views/16_05/washer4.ipt 80.5 KB
Exercise Files/01_Basic concepts/01_03/washer4.ipt 80.0 KB
Exercise Files/03_Navigating the interface/03_02/washer4.ipt 80.0 KB
Exercise Files/03_Navigating the interface/03_04/washer4.ipt 80.0 KB
Exercise Files/03_Navigating the interface/03_05/washer4.ipt 80.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/washer4.ipt 80.0 KB
Exercise Files/05_Creating geometry/05_03/06_03_Computer_Mouse_Start.ipt 79.5 KB
Exercise Files/14_Using constraints to position parts/14_01/Universal Shaft Start.iam 75.5 KB
Exercise Files/08_Projecting and importing geometry/08_02/Importing AutoCAD Geometry.dwg 32.6 KB
Exercise Files/01_Basic concepts/01_03/lockfile.lck 16.0 KB
Exercise Files/03_Navigating the interface/03_01/lockfile.lck 16.0 KB
Exercise Files/03_Navigating the interface/03_02/lockfile.lck 16.0 KB
Exercise Files/03_Navigating the interface/03_03/lockfile.lck 16.0 KB
Exercise Files/03_Navigating the interface/03_04/lockfile.lck 16.0 KB
Exercise Files/03_Navigating the interface/03_05/lockfile.lck 16.0 KB
Exercise Files/03_Navigating the interface/03_06/lockfile.lck 16.0 KB
Exercise Files/04_Sketching concepts and settings/04_03/lockfile.lck 16.0 KB
Exercise Files/05_Creating geometry/05_02/lockfile.lck 16.0 KB
Exercise Files/05_Creating geometry/05_03/lockfile.lck 16.0 KB
Exercise Files/06_Editing sketch geometry/06_01/lockfile.lck 16.0 KB
Exercise Files/07_Work features/07_02/lockfile.lck 16.0 KB
Exercise Files/07_Work features/07_03/lockfile.lck 16.0 KB
Exercise Files/07_Work features/07_04/lockfile.lck 16.0 KB
Exercise Files/08_Projecting and importing geometry/08_01/lockfile.lck 16.0 KB
Exercise Files/08_Projecting and importing geometry/08_02/lockfile.lck 16.0 KB
Exercise Files/09_Understanding part modeling - sketch feature/09_03/lockfile.lck 16.0 KB
Exercise Files/09_Understanding part modeling - sketch feature/09_05/lockfile.lck 16.0 KB
Exercise Files/09_Understanding part modeling - sketch feature/09_06/lockfile.lck 16.0 KB
Exercise Files/09_Understanding part modeling - sketch feature/09_08/lockfile.lck 16.0 KB
Exercise Files/10_Understanding part modeling - placed features/10_01/lockfile.lck 16.0 KB
Exercise Files/10_Understanding part modeling - placed features/10_02/lockfile.lck 16.0 KB
Exercise Files/10_Understanding part modeling - placed features/10_03/lockfile.lck 16.0 KB
Exercise Files/10_Understanding part modeling - placed features/10_04/lockfile.lck 16.0 KB
Exercise Files/10_Understanding part modeling - placed features/10_05/lockfile.lck 16.0 KB
Exercise Files/11_Creating feature patterns/11_01/lockfile.lck 16.0 KB
Exercise Files/11_Creating feature patterns/11_02/lockfile.lck 16.0 KB
Exercise Files/11_Creating feature patterns/11_03/lockfile.lck 16.0 KB
Exercise Files/11_Creating feature patterns/11_04/lockfile.lck 16.0 KB
Exercise Files/11_Creating feature patterns/11_05/lockfile.lck 16.0 KB
Exercise Files/12_Creating sculpted objects/12_02/lockfile.lck 16.0 KB
Exercise Files/12_Creating sculpted objects/12_03/lockfile.lck 16.0 KB
Exercise Files/12_Creating sculpted objects/12_04/lockfile.lck 16.0 KB
Exercise Files/13_Adding parts to an assembly file/13_01/lockfile.lck 16.0 KB
Exercise Files/13_Adding parts to an assembly file/13_02/lockfile.lck 16.0 KB
Exercise Files/13_Adding parts to an assembly file/13_03/lockfile.lck 16.0 KB
Exercise Files/13_Adding parts to an assembly file/13_04/lockfile.lck 16.0 KB
Exercise Files/14_Using constraints to position parts/14_01/lockfile.lck 16.0 KB
Exercise Files/14_Using constraints to position parts/14_02/lockfile.lck 16.0 KB
Exercise Files/14_Using constraints to position parts/14_03/lockfile.lck 16.0 KB
Exercise Files/14_Using constraints to position parts/14_04/lockfile.lck 16.0 KB
Exercise Files/14_Using constraints to position parts/14_05/lockfile.lck 16.0 KB
Exercise Files/14_Using constraints to position parts/14_06/lockfile.lck 16.0 KB
Exercise Files/14_Using constraints to position parts/14_07/lockfile.lck 16.0 KB
Exercise Files/15_Assembly visualization techniques/15_01/lockfile.lck 16.0 KB
Exercise Files/15_Assembly visualization techniques/15_02/lockfile.lck 16.0 KB
Exercise Files/15_Assembly visualization techniques/15_03/lockfile.lck 16.0 KB
Exercise Files/16_Creating drawing views/16_01/lockfile.lck 16.0 KB
Exercise Files/16_Creating drawing views/16_02/lockfile.lck 16.0 KB
Exercise Files/16_Creating drawing views/16_03/lockfile.lck 16.0 KB
Exercise Files/16_Creating drawing views/16_04/lockfile.lck 16.0 KB
Exercise Files/16_Creating drawing views/16_05/lockfile.lck 16.0 KB
Exercise Files/17_Setting basic dimensions/17_01/lockfile.lck 16.0 KB
Exercise Files/17_Setting basic dimensions/17_02/lockfile.lck 16.0 KB
Exercise Files/17_Setting basic dimensions/17_03/lockfile.lck 16.0 KB
Exercise Files/Inventor Essentials.ipj 16.0 KB

Lynda - Autodesk Inventor 2017 Essential Training

File List

Download Torrent

Related Resources

Copyright Infringement